Robotronics Buzz E Instrukcje Operacyjne Pobierz pdf (Strona 24)

Chapter 11 Battery Option

CHAPTER 11 Battery System

The battery available for the Buzz system is a rechargeable sealed lead-acid Gel type battery

12 Volt 31AH. This type of battery is very dependable and safe. It can be repeatedly charged

and discharged. This is an optional item needed only if you are at a location that does not have

electrical outlets.

Connecting

The battery connects to the same connection as the power supply, to the red and black

connector on the back of the House.

How to Recharge

Connect the alligator clips of the charger to the battery posts. Plug the charger into an 110 V

outlet and the charger needle will go up to some level. The charger is an automatic battery

charger. This will recharge the battery in 10 to 14 hours. This type of charger will not

overcharge the battery if left "ON" indefinitely. Avoid leaving it charging for more than 5 days.

Generally remove the battery from the charger when the charger indicates a full charge.

Cautions

Batteries are provided with a polarized connector to avoid connecting the battery backwards

and damaging the circuitry. If these connections are disturbed, please be careful to observe

proper polarity when reconnecting the battery. Use a digital voltmeter, if necessary to verify

polarity of the battery and at the end of the connector of the battery.

It is best not to allow the battery to go completely dead as this shortens the life of the battery

and makes recharging more difficult. Fully charge the battery after each use.

Important: Charge the battery to a full charge right after using the robot. Gel

type batteries will be damaged if not kept fully charge at all times.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 74 75

Brak uwag

Robotronics Buzz E Instrukcje Operacyjne Strona 24