Robotronics Buzz E Instrukcje Operacyjne Pobierz pdf (Strona 22)

Chapter 10 Voice Modifier

The pitch shifter (voice modifier) can change the operators voice to disguise it and create the

Smoke Alarm character voice. The operators voice signal is sent to the audio board in the

control box. The audio board sends your voice to the Input of the pitch shifter. It is modified

and sent from the shifter Output back to the audio board again and then it mixes with the other

audio going to the Speakers.

8. D.Time Speed Knob – Delay time. Not used in pitch shifter or harmonist mode.

9. Balance knob – This adjust the output balance between the direct sound and the effect

sound. Typically set this on EFX for the full effect.

10. H.R. Key switch. Not used.

11. Pitch Switch. Adjusts the amount of pitch shift.

12. Mode Switch. Selects the mode. Typically use the pitch shifter mode.

The pitch shifter has two basic effects; a digital pitch shifter and a delay. There are many

variations of these two effects. When used as a pitch shifter, you can vary the shift within +/- 2

octaves. Set the mode knob to Pitch shifter and then vary the pitch knob until you get the sound

of voice that you want. You can get a similar effect with the harmonist position but the pitch

shifter gives you the best sound. These are the most common modes used because these

modes give you the ability to adjust the shift of your voice to exactly what you want whether up

or down. About 2:00 on the pitch knob gives you a good voice.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 74 75

Brak uwag

Robotronics Buzz E Instrukcje Operacyjne Strona 22